Drylok Vs Quikrete Hydraulic Cement: Clear Every Doubt

In terms of application both brands are very popular but what makes one of them easier and more practical for waterproofing and fixing your home sealing is a point of concern.

How Easy To Use Drylok Hydraulic Cement?
Drylok hydraulic cement is very easy to use on the leakage site. You can paint its layer over the surface with a roller or you can brush. The choice is yours.

How Easy To Use Quickrete Hydraulic Cement?
Quickrete hydraulic cement is also provided a quick and easy application on whatever you are going to fix, but Quickrete Hydraulic cement just slows down the moisture and might not be a permanent solution to cure wet and moist surfaces.

Drylok hydraulic cement comes in different varieties and all of them can be set within 5 minutes of application.
On the other hand, Quickrete fast-setting concrete will take 20 to 40 minutes to cure.
Definitely here, Drylok is a clear winner. If you want a fast and quick fix to your work then you must go with Drylok.

If we talk about which type of texture you will get by applying these two hydraulic cement brands’ on the site then Drylok doesn’t provide a rough texture while Quickrete offers a rough texture that most people prefer.

But if you want to apply Drylok and want a rough texture over the surface then you will achieve this by applying multiple coatings of the Drylok cement and spreading sand over the surface as it dries.

Here, I would say I must go with Quickrete. Quickrete Hydraulic Cement is not like just mixing some water and then using it on the site, you have to add some stones and gravel in a prescribed ratio and mix them with Quickrete hydraulic cement.

Stones and gravel provide a rigid and rough texture and provide better durability and longevity to the site which needs a fix.

but if you want to use Drylok for the same longevity then you have to use some sealers like Pond Armer.

Water PH level is the main concern for those homeowners who want to apply hydraulic cement to their swimming pools.

Due to its quick-dry and healed nature Drylok doesn’t alter the water PH level and is the best choice for making the swimming pool foundation or fixing sealing or leakage of the swimming pool.

On the other hand, Quickrete concrete takes 15 to 20 minutes to cure and some portion of it gets mixed with water. This is the reason it increases the water PH level and is not suitable for swimming pool construction.

It depends on several key factors meaning the area of the site, and how large or small a gap is. In some cases, multiple layers of hydraulic cement are required to fix the sealing or gap permanently.

Example:
Here, I’m giving a rough idea about the cost of Drylok hydraulic cement. If you want to seal your basement with Drylok then it will cost you between $0.60 to $1 per square foot.

On the other hand, Quickrete mortar mix is a much cheaper and the best budget-friendly option for those homeowners who want to cure the basement sealing and gaps on a tight budget.

These estimates will give a clear idea that Drylok will cost you much higher than Quicker Concrete.

Yes, definitely you can paint over Drylok after 24 hours of installation. Latex or oil-based primer might be used by brush or roller.

Yes, of course, you can paint over Quickrete hydraulic cement using Latex- or oil-based paint.

The manufacturers recommend painting by Latex after one week of installation and if you want to use oil-based paint then you have to wait for 28 days post-installation.